Quick Answer
Specify an OEM machete logo on the finished tool, not just in an artwork file. Mark its exact surface, side, orientation, dimensions and reference points on a drawing. Agree on the marking method and acceptable appearance, then approve a production-intent blade, handle and package. Keep the logo clear of grip and traceability areas, and inspect bulk units against the approved revision.
Key Takeaways
- An artwork file alone does not establish where the logo goes.
- Blade, handle and sheath surfaces need different marking proofs.
- A signed mark proof does not approve an untested blade construction.
Which Surface Should Carry the Logo?
A blade mark may be visible in retail display but can change appearance after coating or sharpening. A handle mark remains with the assembled tool but must not make the grip uncomfortable. A sheath or carton mark has different visibility and abrasion risks.
Show both sides of the finished model, keep the mark away from rivets, seams and the cutting edge, and preserve space for model, lot and any destination-specific mandatory information. Confirm how the marked tool appears inside its final sleeve.
Request a Wholesale Quote：Whatsapp : (+86 13383021196) E-mail : gemlight@ganzhedao.com
| Surface | Verify on finished unit | Buyer action |
|---|---|---|
| Blade | Coating, sharpening and display orientation | Approve a finished blade sample. |
| Handle | Grip comfort, grain or molded texture | Test the assembled grip. |
| Sheath or retail pack | Wear, stitching and display visibility | Approve the packed sample. |
How Should Artwork and Position Be Defined?
Provide controlled artwork and a revision ID, finished dimensions, side and orientation. Dimension the location from a fixed blade shoulder or handle end, especially on a curved grip. Set a reasonable placement tolerance with the supplier rather than leaving “logo on handle” open to interpretation.
Ask the factory to prove the proposed printing, laser, stamping or molding method on the real material. Check legibility, contrast, two-color registration where relevant, rough residue, and survival after normal handling. Discuss any tooling or setup charge separately.
How Do Buyers Keep Production on the Approved Version?
Approve a production-intent tool with the final blade, finish, handle, guard and pack. Record artwork and drawing revisions separately, then link the technical SKU, logo variant, production lot and purchase order. Limit the supplier’s artwork usage to the agreed order.
At shipment inspection, compare sampled marks with the retained unit and carton labels. Check for missing, reversed or obscured logos and mixed old/new components. Reapprove the mark if the mold, coating or handle material changes; never let an artwork change silently approve a blade change.
Request a Wholesale Quote：Whatsapp : (+86 13383021196) E-mail : gemlight@ganzhedao.com
What Belongs in the OEM Marking RFQ?
RFQ checklist:
- Technical SKU and finished surface: prevent a logo being applied to the wrong model.
- Artwork file and revision: stop uncontrolled attachment swaps.
- Side, orientation and dimensioned position: make placement inspectable.
- Marking method and acceptable finish: test durability and grip.
- Production-intent proof and approval owner: freeze the accepted result.
- Setup cost, lot labels and rework rule: price and trace deviations.
Buyer FAQ
Can a logo cover a model or lot mark?
No. Reserve separate, readable traceability space.
Does artwork approval cover bulk production?
Only when placement and method are proven on a finished sample.
Does a new handle finish need another proof?
Yes, if it changes contrast, adhesion or grip.
Request a Wholesale Quote：Whatsapp : (+86 13383021196) E-mail : gemlight@ganzhedao.com
